Bharat Petroleum gets green nod for Rs3,313 crore BS-VI for MS block project1 min read . Updated: 04 Nov 2016, 02:24 PM IST
BPCL intends to maximize and upgrade MS and diesel processing capabilities to meet BS-VI fuel specifications by 1 April, 2020
New Delhi: State-owned Bharat Petroleum Corporation Ltd (BPCL) has been given environment clearance to set up additional facilities at its Kochi refinery to meet the Bharat Stage (BS)-VI quality auto fuel norms and establish new MS block, which will entail an investment of Rs3,313 crore.
As per Auto Fuel Policy 2025, the government has laid down a roadmap for complete transition to BS-VI auto fuel by April 2020 in the country.
The Kochi refinery of BPCL is currently implementing the Integrated Refinery Expansion Project (IREP), which will enhance refinery capacity from 9.5 million metric tonne per annum (MMTPA) to 15.5MMTPA and upgrade auto fuel quality as per BS-IV and part BS-V norms.
“Based on the recommendations of the expert advisory committee (EAC), the environment ministry has accorded the environment clearance to the BPCL’s auto fuel BS-VI upgradation and new MS block project," a senior government official with knowledge of the matter said.
The clearance to the project is subject to certain conditions.
About 7acres of land is required for the proposed BS-VI project and the total cost is estimated at Rs3,313 crore, the official added.
Among conditions specified, BPCL has been directed that its water requirement from river Periyar after implementation of IREP and BS-VI project should not exceed 1,372.2 cubic meter per hour and it should obtain prior permission from the competent authority.
The company has been asked to adhere strictly to the stipulations made by the Kerala state pollution control board (KSPCB) and any other statutory authority.
It has also been asked to decide locations of ambient air quality monitoring stations in consultation with KSPCB and ensure at least one station is installed in the upwind and downwind direction.
That apart, BPCL has been directed to set up a separate environment management cell with full-fledged laboratory facilities to carry out the environment management and monitoring functions.
Post IREP, BPCL said its Kochi refinery will be able to produce BS-IV quality MS and diesel along with partial production of BS-V products, and it will require additional facilities to achieve BS-VI quality specifications for MS.
BS-VI quality specification for HSD (high speed diesel) can be achieved post IREP through blending.
BPCL intends to maximize and upgrade MS and diesel processing capabilities to meet BS-VI fuel specifications by 1 April, 2020, it said in its Environmental Impact Assessment report.